| Availability: | |
|---|---|
| Quantity: | |
Soren20061117
JINGCHENG
3917290000 3904610000 3917390000
JINGCHENG Waterproofing Construction Equipment Hose is an electrically heated hose for waterproofing construction and non-curing spray equipment, heat resistant up to 230°C and known since 2013 for its stability and durability in harsh weather and on harsh job sites. This page answers the ten questions buyers ask most often — temperature, sizes, weather, electrical options, model code, handling and what to send with an enquiry — using only the data in the 2025 catalog.
Contractors and equipment builders who spray non-curing rubber asphalt and similar hot waterproofing coatings tend to ask the same questions before they buy a heated hose: how hot it can run, which size to choose, how it copes with bad weather, what information the factory needs, and how to keep it working through a long season. This page collects those questions and answers them with the data published in the JINGCHENG 2025 Electrically Heated Hose Catalog, so that a buyer can prepare a complete enquiry in one step.
JINGCHENG's waterproofing construction equipment hose is used on all types of waterproofing construction equipment and non-curing spray equipment. Since 2013 JINGCHENG has worked long-term with leading companies in the waterproofing equipment industry, and the hose has earned strong feedback for its stability and durability in harsh weather and on harsh job sites.
Hot waterproofing coatings must stay fluid between the melting tank and the spray gun. An unheated line lets the material cool and thicken on its way to the gun, which raises pump load and spoils the spray pattern. The JINGCHENG hose performs two functions at once: it heats and it insulates. The heating layer is made of uniformly braided heating elements, which minimize the temperature difference along the inner wall, and the hose is built with high insulation-efficiency materials selected with the surface temperature in mind.
The catalog rating is heat resistance up to 230°C. If your process needs a higher temperature, JINGCHENG can build a custom hose; state the required temperature in your enquiry and our engineers will confirm the design.
The catalog lists three standard bores for this product — 1/2", 5/8" and 3/4" inner diameter:
Inner Diameter (inch) | Outer Diameter (mm ±0.2) | Working Pressure (bar) | Working Pressure (psi) | Burst Pressure (bar) | Burst Pressure (psi) | Min. Bend Radius (mm) |
|---|---|---|---|---|---|---|
1/2" | 15.9 | 118 | 1704 | 470 | 6815 | 150 |
5/8" | 19 | 88 | 1269 | 350 | 5075 | 180 |
3/4" | 22.6 | 85 | 1234 | 340 | 4930 | 260 |
Data source: JINGCHENG 2025 Electrically Heated Hose Catalog. Heat resistance up to 230°C; higher temperature on request. Confirm the rating at your operating temperature with our engineers when ordering.
All three sizes share a 4:1 ratio between burst and working pressure. The larger bores carry more material per minute, while the smaller bore is lighter and can be coiled more tightly (150 mm minimum bend radius against 260 mm for 3/4").
Start from the pump output and the length of the hose. A long line or a high-output machine usually benefits from a larger bore, because flow resistance falls as the bore increases. A short line on a compact sprayer, or a hose that must be carried and coiled by one operator, often works best with 1/2". Check the coil or hose rack on the machine as well: the hose must never be coiled tighter than the bend radius of the chosen size. If you are unsure, send the pump data and the route length and our engineers will suggest a size.
Stability in bad weather and rough site conditions is what this product is known for in the waterproofing industry. The insulation keeps heat in the line when the air is cold or windy, and the braided heating layer keeps the bore temperature even from end to end. The catalog operating environment is ambient -40°C to +55°C with relative humidity not above 85%. The surrounding medium must not contain gases that corrode metal or damage insulation, or conductive media; for special environments a customized hose is available.
Every JINGCHENG heated hose is built to order. The catalog options are:
Rated voltage: 380 Vac, 220 Vac, 110 Vac, 12 Vdc or other
Temperature sensor: Type J or Type K thermocouple, Ni120, PT100, PT1000 or other
Rated power: 110, 150, 170 or 200 W/m, or other
Length: 3 m, 4.5 m, 5 m, 6 m, 10 m or other
End fittings: US, British or metric thread at each end, or other
Wiring: pin number, wire color and function defined for the controller end and the gun end
Match the sensor to the controller already fitted to the spray machine; a mismatch is one of the most common causes of wrong temperature readings.
A model code such as JCH-200-16-B-3X220-P2-8 records the core specification in one line: working temperature (200 = 200°C), inner diameter in mm (16 = Φ16), inner tube type (B = stainless steel corrugated tube, TB = PTFE hose with stainless steel braid, T = PTFE hose, X = special material), supply voltage (3X220 = three-phase four-wire 220 V), sensor (P2 = PT100 two-wire, P3 = PT100 three-wire, K or J thermocouple, W = no sensor, T = special sensor) and working pressure in MPa (8 = 8 MPa). Keeping this code on file makes repeat orders and spares quick and accurate.
Do not twist the hose sideways during installation or use; lateral twisting can cause leakage, flow loss, hose damage or fire.
Avoid sharp bends, especially right behind the fittings at the tank end and the gun end.
Wire the hose strictly according to its technical data and the pin table supplied with it.
Let authorized, trained and preferably dedicated operators handle the hose; unauthorized modification or adjustment voids the warranty.
Contact JINGCHENG engineers when a situation arises that the instructions do not cover.
Yes. Hoses are customized by application and by the temperature, viscosity and flowability of the material, so an equipment builder can standardize one specification for each machine model and reorder by model code. Every hose is checked for defects before packing and shipment.
Machine type and coating material, with application temperature
Required bore (1/2", 5/8" or 3/4") and hose length
Supply voltage, rated power and sensor type
Thread standard at each end
Pin layout at the controller end and the gun end
Any special site conditions or temperatures above 230°C
Send these details to JINGCHENG and our engineers will confirm a waterproofing construction equipment hose specification and quotation that fits your spray machine and your job sites.
