 |
| Quantity: | |
|---|---|
Soren20060326
JINGCHENG
3917290000 3904610000 3917390000
In gas sampling and emission monitoring systems, hose performance directly affects sampling accuracy, temperature stability, and long-term equipment reliability. When the sample gas cools too quickly during transfer, condensation, measurement drift, and unstable analysis can follow. That is why the hose in a heated sampling system is not just a connection part. It is a critical part of maintaining sample integrity.
Shenzhen Jingcheng’s Gas Detection Equipment Hose is designed for heated transfer applications in gas analysis systems. According to your catalog, it is widely used in flue gas pretreatment equipment, online monitoring equipment, infrared sampling analyzers, ultraviolet sampling analyzers, and laboratory testing equipment. The product is also described as bend-resistant, fold-resistant, and stable in insulation performance, which is exactly what many gas monitoring systems require in continuous-duty operation.
A gas detection hose must do more than carry gas from one point to another. It must help keep the sample at a controlled temperature, reduce heat loss, and support accurate downstream analysis. In many monitoring applications, stable heated transfer is essential because temperature fluctuation can affect condensation behavior and compromise sampling results.
Your catalog states that this hose can withstand temperatures up to 230°C, with higher-temperature customization available on request. It also uses uniformly braided heating elements to help minimize temperature differences along the inner wall, while high-efficiency insulation materials are used to support stable thermal performance.
This hose is specifically positioned for gas detection and analytical equipment rather than generic fluid transfer. That makes it much more relevant for users in emission monitoring, sampling pretreatment, and laboratory gas analysis.
The catalog lists a maximum heat resistance of up to 230°C, with higher-temperature customization available if required. This gives the hose the thermal capability needed for many heated gas sampling applications.
The heating layer is made of uniformly braided heating elements, helping reduce temperature distribution differences along the inner wall. For gas analysis systems, more uniform heating can help maintain sampling consistency across the hose length.
The hose is manufactured with high-insulation-efficiency materials while considering surface temperature. This helps improve heat retention and supports more stable heated transfer performance in demanding analytical environments.
Your PDF specifically highlights that this gas sampling hose is resistant to bending and folding and provides stable insulation performance. That is important because monitoring systems and laboratory setups often require flexible installation without sacrificing reliability.
| Item | Our Data |
|---|---|
| Product Name | Gas Detection Equipment Hose |
| Product Category | High Temperature Low Pressure Heated Hose |
| Main Applications | Flue gas pretreatment equipment, online monitoring equipment, infrared sampling analyzers, ultraviolet sampling analyzers, laboratory testing equipment |
| Max Heat Resistance | Up to 230°C |
| Higher Temperature Option | Available on request |
| Heating Structure | Uniformly braided heating elements |
| Insulation Design | High-efficiency insulation materials |
| Product Feature | Bend-resistant and fold-resistant |
| Thermal Performance | Stable insulation performance |
The above product description and functional positioning come directly from the gas detection equipment hose section in your catalog.
| I.D. | O.D. (mm ±0.2) | Working Pressure (bar) | Working Pressure (psi) | Burst Pressure (bar) | Burst Pressure (psi) | Min. Bend Radius (mm) |
|---|---|---|---|---|---|---|
| 3/16" | 7.6 | 203 | 2936 | 810 | 11745 | 30 |
| 1/4" | 9 | 173 | 2501 | 690 | 10005 | 30 |
| 5/16" | 11 | 158 | 2284 | 630 | 3915 | 40 |
These size and pressure specifications are listed in the product parameter table for the gas detection equipment hose on page 7 of the PDF.
A reliable gas detection equipment hose is essential for maintaining stable heated transfer in analytical and monitoring systems. When the hose is properly designed for gas sampling, it helps support temperature control, installation flexibility, and long-term sampling reliability.
Shenzhen Jingcheng’s gas detection equipment hose combines up to 230°C heat resistance, uniform braided heating, high-efficiency insulation, bend resistance, and compact size options for gas sampling and monitoring applications. For customers who need a custom heated hose solution for pretreatment, analysis, or laboratory systems, this product offers practical performance and application-focused design.
In gas sampling and emission monitoring systems, hose performance directly affects sampling accuracy, temperature stability, and long-term equipment reliability. When the sample gas cools too quickly during transfer, condensation, measurement drift, and unstable analysis can follow. That is why the hose in a heated sampling system is not just a connection part. It is a critical part of maintaining sample integrity.
Shenzhen Jingcheng’s Gas Detection Equipment Hose is designed for heated transfer applications in gas analysis systems. According to your catalog, it is widely used in flue gas pretreatment equipment, online monitoring equipment, infrared sampling analyzers, ultraviolet sampling analyzers, and laboratory testing equipment. The product is also described as bend-resistant, fold-resistant, and stable in insulation performance, which is exactly what many gas monitoring systems require in continuous-duty operation.
A gas detection hose must do more than carry gas from one point to another. It must help keep the sample at a controlled temperature, reduce heat loss, and support accurate downstream analysis. In many monitoring applications, stable heated transfer is essential because temperature fluctuation can affect condensation behavior and compromise sampling results.
Your catalog states that this hose can withstand temperatures up to 230°C, with higher-temperature customization available on request. It also uses uniformly braided heating elements to help minimize temperature differences along the inner wall, while high-efficiency insulation materials are used to support stable thermal performance.
This hose is specifically positioned for gas detection and analytical equipment rather than generic fluid transfer. That makes it much more relevant for users in emission monitoring, sampling pretreatment, and laboratory gas analysis.
The catalog lists a maximum heat resistance of up to 230°C, with higher-temperature customization available if required. This gives the hose the thermal capability needed for many heated gas sampling applications.
The heating layer is made of uniformly braided heating elements, helping reduce temperature distribution differences along the inner wall. For gas analysis systems, more uniform heating can help maintain sampling consistency across the hose length.
The hose is manufactured with high-insulation-efficiency materials while considering surface temperature. This helps improve heat retention and supports more stable heated transfer performance in demanding analytical environments.
Your PDF specifically highlights that this gas sampling hose is resistant to bending and folding and provides stable insulation performance. That is important because monitoring systems and laboratory setups often require flexible installation without sacrificing reliability.
| Item | Our Data |
|---|---|
| Product Name | Gas Detection Equipment Hose |
| Product Category | High Temperature Low Pressure Heated Hose |
| Main Applications | Flue gas pretreatment equipment, online monitoring equipment, infrared sampling analyzers, ultraviolet sampling analyzers, laboratory testing equipment |
| Max Heat Resistance | Up to 230°C |
| Higher Temperature Option | Available on request |
| Heating Structure | Uniformly braided heating elements |
| Insulation Design | High-efficiency insulation materials |
| Product Feature | Bend-resistant and fold-resistant |
| Thermal Performance | Stable insulation performance |
The above product description and functional positioning come directly from the gas detection equipment hose section in your catalog.
| I.D. | O.D. (mm ±0.2) | Working Pressure (bar) | Working Pressure (psi) | Burst Pressure (bar) | Burst Pressure (psi) | Min. Bend Radius (mm) |
|---|---|---|---|---|---|---|
| 3/16" | 7.6 | 203 | 2936 | 810 | 11745 | 30 |
| 1/4" | 9 | 173 | 2501 | 690 | 10005 | 30 |
| 5/16" | 11 | 158 | 2284 | 630 | 3915 | 40 |
These size and pressure specifications are listed in the product parameter table for the gas detection equipment hose on page 7 of the PDF.
A reliable gas detection equipment hose is essential for maintaining stable heated transfer in analytical and monitoring systems. When the hose is properly designed for gas sampling, it helps support temperature control, installation flexibility, and long-term sampling reliability.
Shenzhen Jingcheng’s gas detection equipment hose combines up to 230°C heat resistance, uniform braided heating, high-efficiency insulation, bend resistance, and compact size options for gas sampling and monitoring applications. For customers who need a custom heated hose solution for pretreatment, analysis, or laboratory systems, this product offers practical performance and application-focused design.
