Home » Products » PTFE Hose » Spring-Lined Convoluted PTFE Hose Buyer FAQ on Pressure, Temperature and Anti-Kink Design for Chemical Lines

loading

Share to:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Spring-Lined Convoluted PTFE Hose Buyer FAQ on Pressure, Temperature and Anti-Kink Design for Chemical Lines

JINGCHENG Spring-Lined Convoluted PTFE Hose (series JCC-20000-PTFE) combines a smooth-wall PTFE inner tube, a corrugated outer profile and a 304 stainless steel spiral spring middle layer for highly corrosive chemicals, hot air, hot oil and steam from -65°C to +260°C. This buyer FAQ explains the pressure ratings from 2.64 MPa at 1/4" to 1.2 MPa at 1", the temperature window, and how the spring resists kinking across the seven catalog sizes from 1/4" to 1" ID.
Availability:
Quantity:
  • Soren20061120

  • JINGCHENG

  • 3917290000 3904610000 3917390000

Spring-Lined Convoluted PTFE Hose Buyer FAQ on Pressure, Temperature and Anti-Kink Design for Chemical Lines

JINGCHENG Spring-Lined Convoluted PTFE Hose (series JCC-20000-PTFE) combines a smooth-wall PTFE inner tube, a corrugated outer profile and a 304 stainless steel spiral spring middle layer for highly corrosive chemicals, hot air, hot oil and steam from -65°C to +260°C. This buyer FAQ explains the catalog working pressures from 2.64 MPa to 1.2 MPa, the -65°C to +260°C temperature window, and how the 304 stainless spiral spring in the middle layer resists kinking across the seven sizes from 1/4" to 1" ID.

About This Buyer FAQ

Buyers looking at a spring-lined convoluted PTFE hose usually want three things settled before they order: how much pressure each size can take, how hot or cold the line can run, and what the internal spring actually does against kinking and crushing. This FAQ answers those questions with the figures in the JINGCHENG PTFE Hose Catalog for the JCC-20000-PTFE series.

The catalog describes the construction as a PTFE inner tube with a smooth inner wall and a corrugated outer profile, and a 304 stainless steel spiral spring in the middle layer. The temperature range is -65°C to +260°C. It is used for highly corrosive chemicals, hot air, hot oil and steam, and is listed for the food, cosmetics, chemical and pharmaceutical industries. Seven standard sizes run from 1/4" to 1" ID. All specifications can be customized according to customer parameters.

Q1. What does the 304 spiral spring do?

The spring is the anti-kink and anti-crush element. A smooth-bore PTFE tube kinks if it is bent too tightly; a fully convoluted hose bends easily but is a low-pressure, ridged-bore line. The JCC-20000 hose sits between those two: the smooth inner wall drains and flows more easily than a fully corrugated bore, the corrugated outer profile allows tight routing, and the 304 spiral spring in the middle layer helps the hose keep its round bore when it is bent, handled or lightly loaded from the outside. That is the anti-kink design in the catalog construction. It is not a substitute for respecting the minimum bend radius, and it is not a pressure braid.

Q2. What pressure can each size take?

Working pressure is much higher than that of the unreinforced inner spiral convoluted hose (JCC-10000), because of the spring-supported wall. The seven catalog rows are:

Part No.

Nominal Size

Inner Diameter (mm ±0.3)

Outer Diameter (mm ±0.3)

Working Pressure (psi)

Working Pressure (MPa)

Burst Pressure (psi)

Burst Pressure (MPa)

Min. Bend Radius (inch)

Min. Bend Radius (mm)

JCC-20006-PTFE

1/4"

6.8

8.35

396

2.64

1276

8.8

0.75

19

JCC-20008-PTFE

5/16"

7.9

10.3

378

2.52

1218

8.4

0.75

19

JCC-20010-PTFE

3/8"

10

11.93

360

2.4

1160

8

0.98

25

JCC-20013-PTFE

1/2"

13.6

15.1

270

1.8

870

6

1.50

38

JCC-20016-PTFE

5/8"

16.7

18.3

236.83

1.63

725

5

1.97

50

JCC-20019-PTFE

3/4"

19.8

22

203

1.4

609

4.2

2.48

63

JCC-20025-PTFE

1"

26.4

29.4

180

1.2

580

4

2.95

75

Data source: JINGCHENG PTFE Hose Catalog (JCC-20000-PTFE Series). Operating temperature range: -65°C to +260°C. All specifications can be customized according to customer parameters.

Working pressure falls as the bore grows, from 2.64 MPa (396 psi) at 1/4" and 2.52 MPa at 5/16", through 2.4 MPa at 3/8", 1.8 MPa at 1/2", 1.63 MPa at 5/8" and 1.4 MPa at 3/4", down to 1.2 MPa (180 psi) at 1". Burst pressure ranges from 8.8 MPa to 4 MPa and is a safety margin only — never use it as a design figure. Choose a size whose working pressure stays above the highest pressure the line will see, including start-up peaks on steam and hot oil systems.

ID and OD tolerance is ±0.3 mm. Use the actual diameters when you select connections, for example 13.6 mm ID / 15.1 mm OD on the 1/2" size.

Q3. What temperature range is published?

The catalog temperature window is -65°C to +260°C. Note that this is not the same as the -70°C to +260°C range listed for the bare smooth bore tube and the inner spiral convoluted hose; the spring-lined series starts at -65°C. Keep the operating point, including steam and hot oil, inside that window, and bring hot lines up to temperature gradually. If your process sits outside -65°C to +260°C, ask us to confirm a custom construction before you order.

Q4. How tightly can it be bent without defeating the anti-kink design?

The spring lets this hose bend far more tightly than a plain smooth bore tube, but every size still has a minimum, measured at the centreline:

  • 19 mm for 1/4" and 5/16"

  • 25 mm for 3/8"

  • 38 mm for 1/2"

  • 50 mm for 5/8"

  • 63 mm for 3/4"

  • 75 mm for 1"

Bending tighter than these values can flatten the bore, overload the spring and shorten service life — which is exactly the failure the spring is there to prevent when the hose is used inside its limits. Leave a short straight section at each end rather than starting the bend at the fitting, and do not twist the hose about its axis when tightening connections.

Q5. When should I choose JCC-20000 instead of a smooth tube or a fully convoluted hose?

Choose the spring-lined hose when you need a smooth, easy-to-drain bore, tighter routing than a bare tube allows, and a higher working pressure than the unbraided JCC-10000 convoluted hose (0.2–0.4 MPa) can offer, up to 2.64 MPa at 1/4" and 1.2 MPa at 1", on corrosive chemical, hot air, hot oil or steam lines. Stay with a smooth bore JCC-00000 tube for long, gently curved, unreinforced runs, or look at a braided series if the pressure is still higher than the table above.

Q6. What should I send for a quotation?

  1. Medium (corrosive chemical, hot air, hot oil or steam, and any concentration that matters)

  2. Working and maximum temperature, inside or beyond -65°C to +260°C

  3. Working pressure, including peaks

  4. Size from the table, or custom inner and outer diameters

  5. Length, the tightest bend in the route, and end-connection details

With this information JINGCHENG can confirm the right JCC-20000-PTFE size and supply hoses or assemblies made to your parameters.

Previous: 
Next: 

Product Category

If you have any questions, please contact us via email or telephone and we will get back to you as soon as possible.

Contact Us

粤ICP备2023036405号-1

Copyright© 2023 JINCHEN ELECTRIC TRACING CO., LTD. All Rights Reserved.   Sitemap.   Support by Leadong