| Availability: | |
|---|---|
| Quantity: | |
007-11.18-2
JC
3904610000
Jingcheng PTFE heated hose is professionally designed for constant-temperature glue conveying for automation lines. Manufactured in our own factory, fully customizable and available as a direct replacement for imported hoses.
Every unit passes a full set of strict pre-shipment tests including dielectric strength test, pressure holding test, long-cycle heating aging test and simulated glue flow inspection. It delivers evenly distributed heat, fast and stable temperature response and reliable insulation protection.
The hose maintains consistent glue temperature all the way and effectively prevents common troubles: glue cooling and solidification, carbonized glue buildup inside, pipe blockage, fluctuating glue flow and intermittent dispensing. It works well with hot melt machines, automatic dispensers, coating lines, automotive sealing stations and robot gluing systems for diverse fluid conveying applications, helping you cut downtime and spare part cost and keep stable production rhythm.
1. Virgin PTFE liner with ultra-low friction, anti-stick and anti-carbonization, resistant to adhesives and chemicals, less clogging after long run
2.Fully customizable parameters including diameter length connector thermocouple heating power jacket and wire outlet based on drawings and site conditions
3.Multi-layer thermal insulation structure with evenly wound heating wire, low heat loss and controlled temperature drop for consistent glue output over long distance
4.Standardized full quality control system with multi-performance checks on insulation sealing and heating stability to avoid defective products
5.Suitable for multi-industry automation: hot melt transfer precision dispensing spray coating automotive sealing and robot gluing, compatible with mainstream gluing machines
Jingcheng PTFE heated hose is developed for automatic gluing and hot melt conveying, solving typical pain points of temperature loss, glue solidification and carbon residue during long-distance delivery. The inner liner adopts high-grade virgin PTFE, featuring outstanding heat resistance and chemical inertness. Most hot melt adhesives, PU glue and other fluid adhesives hardly adhere to the inner wall, greatly reducing carbonized glue buildup, extending service cycle and lowering maintenance work.
We have rich experience in custom manufacturing beyond standard sizes. Whether you need replacement hoses for imported original parts, supporting pipes for newly built spraying and dispensing machines, or special layout for production line upgrading, our engineering team can customize inner diameter, length, connector type, K/J thermocouple, heating power, wear-resistant outer jacket and lead position according to your drawings, samples or site conditions for seamless installation.
Strict quality checkpoints are set through the whole production, covering incoming PTFE tube inspection, heating wire winding, multi-layer insulation wrapping and connector assembly. Finished products go through high voltage insulation test, air pressure holding test, long-term heating aging test and glue flow simulation test to eliminate potential defects. The well-balanced heating design distributes heat evenly along the hose and limits temperature drop during transfer, ensuring steady glue temperature and consistent fluidity at the outlet, so as to avoid defective parts caused by over-gluing, insufficient glue and poor bonding.
Our products are widely adopted in automotive sealing, robot gluing, hardware and plastic coating, electronic precision dispensing and solvent-free lamination. As direct manufacturer, we support sample evaluation with reliable bulk lead time and technical support. With years of experience in glue system matching, we keep optimizing fluid conveying routes for customers, cutting downtime losses caused by hose failure and delivering cost-effective long-term constant-temperature solutions for automatic gluing lines.
